Aluminobond artistic fluorocarbon aluminum-plastic curtain wall panel plates can be fixed to beams or columns with bolts, platens, or hooks. Hooks can be attached to beams or columns along both sides when use hooks to connect.The diameter of the fixing bolt should not be less than 4mm, and the number of bolts should be determined after calculation according to the wind load and seismic action of the plate.Hooks should be equipped with anti-noise gaskets.

The thickness of the pendant or corner of Aluminobond aluminum-plastic composite panel curtain wall plate should not be less than 3mm. The material can be made of aluminum alloy material or steel that meets the current national standards.Rivets or anchors used to attach pendants or corners to panels are preferably stainless steel. The diameter and number of rivets, screws or bolts should be determined by calculation.
The distance from the center of the rivet, screw or bolt hole to the edge of the plate should not be less than 2 times as the hole diameter, and the hole center distance should not be less than 3 times as the hole diameter.