The fold here is mainly to look at the hardness of the aluminum-plastic panel. Generally, you can fold a corner of the aluminum-plastic panel to see if it is easy to break. Generally speaking, good aluminum-plastic panel is not easy to be broken, and the material…
Mainly to measure the size of aluminum-plastic composite panels, to see if these dimensions meet national and international standards. The international standard for aluminum-plastic composite panels is: 3mm for interior wall panels, 4mm or more for exterior wall panels, and the thickness of aluminum…
When we choose commodity, one of the most commonly used points is to look at it. The same is true for aluminum-plastic panels. The main points are: Leveling: See if the surface of the aluminum-plastic panel is smooth and smooth Ripple: See if the…
1.The necessity of detection of aluminum plastic plate: Aluminum-plastic composite panels are widely used in various architectural decorations and even in buses and subways due to their advantages of light material, good flatness, uniform color, convenient processing and installation and so on. However, nowadays…
Check out if the thickness meets the requirements, and if necessary, measure it with a vernier depth gauge. A magnet should also be prepared to check whether the selected plate is iron or aluminum. Check out whether the surface of the aluminum plastic plate is…
The main mechanical properties of aluminum-plastic composite panels are bending strength, flexural modulus, penetration resistance, shear strength, peel strength, etc. These are important indicators related to the reliability and safety of aluminum-plastic composite panels and important basis for structural design. The main applications of aluminum plastic…
Aluminium composite panel are not covered by the warranty in the following cases: Use our products in an abnormal range, such as interior wall panels for exterior walls. Use our products under abnormal environmental conditions such as climate, temperature, for example, aluminum-plastic panels near…
Aluminium cmposiste panel is a new product with high techniacal content, so there is a certain techniacal difficulty in the quality control of aluminium composite panel. The primary factors affecting the 180º peeling strenth of alumium composite panels are as follows: 1.Aluminium foil quality…
Pay attention to the following points during the installation and use of aluminum-plastic composite panels: The aluminum-plastic composite panel should be stored or installed in a dry and ventilated place to avoid water accumulation and the ambient temperature is not higher than 70 °…
Problems with the use of aluminum plastic panel protective film: After the installation of the aluminum-plastic panel of outer wall, it is easy to make the protective film move the glue after being irradiated by ultraviolet rays. In order to avoid the problem of chromatic…
